• 1

    Slim Torque Multipliers

    Features

    • Compact Size: Compact in size hance can be used in contrained areas
    • Ratio: Higher reduction ratio for low input
    • Safety: Safety Shear pin at the input provisioned to prevent overloading
    • AWUR: In built Anti-Windup Machanism reduces operators effort. Can be used with non-ratchet type torque wrench
    • Pin Lock: Pin Lock mechanism at output Sq. Drive for positive locking of socket
    • Reaction Arm: Different type of reaction arm available as per user requirement
    • Accuracy: Better than +-4% with very high repeatability

    Model No. Capacity Nm Lbf/ft Kgm Reduction Ratio Sq.Drive O.D.(mm) Wt.(kg)
    STM-1 2500 1845 255 1:8 1/2"-1" 81 4.3
    STM-2 3200 2362 326 1:10 1/2"-1" 88 6.3
    STM-3 4200 3100 428 1:10 3.4"-1 1/2" 88 6.8

    Nano Series Torque Multipliers

    Features

    • Compact, heavy duty torque multiplier with a torque multiplication of 5:1
    • Accuracy better than +-4% with high repeatability
    • Provided with detachable reaction handle
    • Optional offset reaction arm also available on demand
    • Supplied in sturdy moulded plastic carrying case for better storage and handling

    Model No. Capacity Kgm. Lbf/ft Nm Ratio Sq.Drive(inch) A(mm) B(mm) Wt.(kg.)
    NANO-17 170 1250 1700 5:1 1/2-3/4 107 115 3.80
    NANO-28 280 2033 2733 5:1 3/4-1 107 126 3.90

    Torque Multipliers

    Features

    • Accuracy better than +|- 4%
    • Precision tightening and loosening of all heavy duty fasteners
    • Low energy input with high torque transfer
    • Higher capacity multipliers are furnished with strong ratchets (Anti-wind up mechanism) allowing jobs to be performed easily, efficiently and safely
    • Precision manufacturing ensures long life and premier quality
    • A groove on output square breaks if over loaded in excess of 20% of its capacity
    • Highest possible load factor is guaranteed due to design and use of forged components

     Standard Series, to 35000 Lbf/ft

     

     

     

     

     

     

    Model No. Capacity Lbf/ft Capacity Nm Ratio Input Square (inch) Output Square (inch) A(mm) B(mm) C min(mm) C max(mm) Wt.(kg.) Wt.(lbs.)
    BTM-5 2000 2700 5 3/4 1 136 135 89 260 8.40 18.48
    BTM-5/25 2000 2700 25 1/2 1 136 163 89 260 11.50 25.30
    BTM-6 2500 3400 5 3/4 1 1/2 136 149 105 260 9.20 20.24
    BTM-6/25 2500 3400 25 1/2 1 1/2 136 176 105 260 12.00 25.40
    BTM-7 4500 6000 25 3/4 1 1/2 168 174 115 310 18.00 39.60
    BTM-7/25 4500 6000 25 1/2 1 1/2 168 226 115 310 22.00 48.40
    BTM-9/25 7000 9500 25 3/4 1 1/2 195 256 150 350 33.00 72.60
    BTM-9/125 7000 9500 125 1/2 1 1/2 195 301 150 350 35.50 78.10
    BTM-11/25 12500 17000 25 3/4 2 1/2 220 360 164 480 52.00 114.40
    BTM-11/125 12500 17000 125 1/2 2 1/2 220 404 164 480 57.00 125.40
    BTM-13/125 3500 47500 125 3/4 2 1/2 315 550 164 480 80.00 176.00

    CanTorque Backup Wrenches

    Features

    • Heavy duty industrial construction
    • Ergonomic ans Safe
    • Totally Mechanical | No Hydraulics
    • Easy to Release
    • Eliminates Striker Wrenches, Shims and Vice Grip Style Backup Wrenches
    • Stock in Standard and Metric Sizes

    CTBW-1 Wrench Handle

     

    Standard Sizes Metric Sizes
    Part No. inch
    CTBW-012 3/4
    CTBW-014 7/8
    CTBW-100 1
    CTBW-102 1 1/8
    CTBW-104 1 1/4
    CTBW-107 1 7/16
    CTBW-110 1 5/8
    CTBW-113 1 13/16
    CTBW-200 2
    CTBW-203 2 3/16
    CTBW-206 2 3/8
    CTBW-209 2 9/16
    CTBW-212 2 3/4
    CTBW-215 2 15/16
    CTBW-302 3 1/8
    Part No. mm
    CTBW-19M 19
    CTBW-22M 22
    CTBW-24M 24
    CTBW-27M 27
    CTBW-30M 30
    CTBW-32M 32
    CTBW-36M 36
    CTBW-41M 41
    CTBW-46M 46
    CTBW-50M 50
    CTBW-55M 55
    CTBW-60M 60
    CTBW-65M 65
    CTBW-70M 70
    CTBW-75M 75
    CTBW-80M 80

    Repair

    Repair

     

    Repair shop:

    • Air impact tools
    • Air drills, die grinders, polishers & sanders
    • Hydraulic cylinders & cylinder pumps
    • Mechanical torque tools & torque multipliers

     

     

     

     

     


     

    Calibration

    Calibration 

     

    You made a significant investment in torquing tools; shouldn’t they be accurate?

    As a leader in the bolting industry we at CanTorque™ believe strongly in total product support. Calibration and certification of torque tools is a major part of that commitment. Torque tools are precision instruments but through daily use and wear and tear can lose their accuracy. Calibrating and Certifying on a regular basis is your assurance that your instrument remains accurate.

    We are continually expanding our range and utilize the latest calibration equipment technology. Our certification service documents information such as the tool's readings at multiple check points, the tool's next scheduled calibration, the temperature at which the tool was calibrated and much more. We recently achieved ISO 9001 certification improving the standards that facilitate our commitment to maintain a state-of-the-art environment. Our calibration laboratory is environmentally controlled and hermetically sealed 24 hours a day, 7 days a week. We are dedicated to providing our clients the best service available at the lowest possible cost.

    Do your tools operate in a rough environment? No problem. Our staff is fully trained to disassemble, inspect, clean and repair virtually any torque tool that has ever been produced!

    The fastest turnaround, ultimate accuracy, affordable repairs and unprecedented after sales support are the foundation on which our calibration laboratory is built.

    We calibrate all makes and types of torque tools including but not limited to:

      

    • Hydraulic torque wrenches
      CanTorque, TorcUP, Hytorc, Sweeney, Etc
    • Pneumtic torque wrenches
      CanTorque, TorcUP, RAD, Norbar, Plarad
    • Torque Multipliers
      CanTorque, Proto, X4, James Morton, SnapOn, Sweeney
    • Hand Torque Wrenches
      CanTorque, CDI, Proto, SnapOn, Armstrong, Norbar, Mac, Precision Instruments, Jet, Westward
    • Torque Screwdrivers, All Makes and Models

     

    Rental

    Rental 

    Boasting the one of largest rental inventories of torque tools in the world, CanTorque has what you need, when you need it. Simply having the tool you need is only the first step. We can also provide outstanding product knowledge, onsite training on the operation and maintenance of the systems and for the most difficult applications can build custom tools and accessories to ensure that your project or shutdown is done right and on time. If that’s not enough we thoroughly inspect, service and recalibrate every tool after each rental, we ship our products in custom fabricated cases with laminated operation manuals to ensure your products arrive in working order and ready to go! This is all included in our already competitive Rental Rates.

     Our current inventory includes:

    • Cantorque Hydraulic Stud Tensioners for 5/8” – 4” Studs
    • CanTorque CT Series Hydraulic Wrenches ¾” – 2 ½” Drive and 127-58,800 Lbf/ft
    • CanTorque RT Series Hydraulic Wrenches ¾” – 5 3/8” a/f 45-47,380 Lbf/ft
    • CanTorque Pneumatic Wrenches ¾” – 1 ½” Drive 120-6000 Lbf/ft
    • Equalizer Flange Alignment and Spreading Systems
    • Impact Sockets ½” – 2 ½” Drive and up to 6 1/8”

     

     


     

    Sales

     

    Sales

     
    CanTorque™ only works with manufactures that are true innovators and leaders in their respective field. We inventory more bolting products and offer more in-house services than any other company; saving you time and money.

    Product and Application Knowledge

    Our factory-trained and field tested staff has the product and application knowledge needed to provide you with recommendations and alternatives for your unique tooling needs. Through the provision of complimentary onsite demonstrations, we provide you with hands-on decision making options where the value of our comprehensive product lines are proven prior to purchase or rental.

    After Sale Product Support

    These days it seems that most companies view closing the sale as the final step in the sales process. We see it as really where our sales cycle begins. Our after sale product support is the basis for our solid repeat customer development. At CanTorque™, we distinguish ourselves from competitors and create a distinct advantage for our existing and new clients. We focus on loyalty to our customers that transcends the rapid product lifecycle changes created by new torque technology. We have implemented an effective product program that others may attempt to imitate, but will never duplicate.